Wash cycles not moving forward

ApplianceWhirlpool Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Richard J. From South Huntington, NY

Oct 30, 2009

1 out of 3 people found this instruction helpful

First UNPLUG THE WASHING MACHINE. Then unscrew the knob and then pull off the bezel (with the arrow on it). Then remove two screws alont the top-back of the unit. Then the two screws located at the base of the control panel section (about six inches from the top - in the back). The cover slides off to expose the timer. There are two more screws on the front (under where the knob was located) that hold the timer in place - they need to be removed. Then pull out the three wire harnesses (I saved the small one for last since it was the hardest to remove - I needed a small screw driver to push down the small plastic latch). Switch out the old timer for the new one and reverse all the steps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer - 60Hz 115V

Part Number: PS351267

In Stock