Injector hose rotted from age

ApplianceMaytag Washer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Hal From Salisbury, MD

Oct 01, 2007

17 out of 19 people found this instruction helpful

Removed the two Phillips screws from the bottom of the front panel on the washer. I pulled the front panel, from the bottom, outward untill the two spring clips released that attach the front panel to the washer top/lid assembly. Removed the two 3/8" hex head bolts securing the washer top to the side panels, with a nut driver. These are located just inside the side panels in each upper corner. Tilted the washer top / lid assembly back in order to expose the injector hose and top of tub. With 1/4 " nut driver, I loosened and removed the hose clamp around the nozzle body and the injector hose. Installed the new hose on the nozzle body , re-tightened clamp. Inserted the grooved end of the injector hose into hole on top of tub. Ran washer fill to check for leaks. None found, reassembled washer in reverse of disassembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Injector Hose (Now subbed to Water Injector Hose)

Part Number: PS2017271

$43.18
In Stock