control panel/handle melted

ApplianceGeneral Electric Microwave


Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Tyron From Palestine, TX

Oct 25, 2009

0 out of 2 people found this instruction helpful

I took the screws holding the automatic vent loose and unscrewed 1 screw holding the panel assembly to the unit and slid it down to allow removal. Then I unscrewed the board assembly from the panel, removed and then re-attached the ribbon wire and then reattached using the original screws. Fairly easy repair job..

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability


Part Number: PS752175

Special Order


Part Number: PS752554

On Order