Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Wallace M - April 5, 2023
Verified Purchase
Fast and easy
I got the correct part in a very short time. That made my wife happy so now I'm very happy too.
★★★★★
★★★★★
Katie N - September 20, 2022
Verified Purchase
Easy. Repair
Very easy to install
★★★★★
★★★★★
Terry F - March 7, 2022
Verified Purchase
Great service !
Found the part I needed and a video to show me how to install. First class service and support.
★★★★★
★★★★★
Gerald W T - March 7, 2022
Verified Purchase
Exact ffit, easy to install
The holding pin tip had worn down, and this new part fit exactly and was an easy repair. The part arrived quickly in perfect condition.
★★★★★
★★★★★
Kari L - January 13, 2022
Verified Purchase
Easy repair. Great part and fast delivery!!
Ordering was easy. The part fit perfect and was delivered fast. Couldn’t be happier.
★★★★★
★★★★★
Pete K - June 30, 2021
Verified Purchase
Pretty easy repair
The video was a help, but I found only the 2 screws on the top half of the arm needed to be removed ( 1 on the top and the 1 on the top half of the back) this made enough room to pull the arm down a few inches to install the spinner. No need to remove the entire arm!
★★★★★
★★★★★
Charles H W - November 5, 2020
Verified Purchase
Quick and easy repair
OEM part kit was easy to install -- loosen two screws, snap the new part in and re-tighten the screws. What took the longest was taking the upper rack out to get to the spinner outlet.
★★★★★
★★★★★
Schuyler P - October 22, 2020
Verified Purchase
Exactly what I needed
Exactly what I expected, exactly what I needed. Super-easy repair.
★★★★★
★★★★★
Karl F - October 13, 2020
Verified Purchase
Easy Repair
The part was obviously new and installed in 2 minutes. Thanks.
★★★★★
★★★★★
Karen I P - October 3, 2020
Verified Purchase
Very easy repair
This was the second time that I had to repair this part. Not sure what happened before, but this time the part snapped right together like it was supposed to do and is working perfectly. The previous part worked for about a year, but kept falling out and I would have to put it back together and it would work a few times.
Great service. Received within 3 business days.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 22 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Spinner rivet wore out.
Removed baskets and water feed tube and put on new part. Dropped a screw and had to remove screen. Otherwise, it would have taken 10 minutes.
William from TACOMA, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The spinner came off because the male part got too small & the female part too big
I took one screw out. That allowed me to pull the plastic flat tube away from the upper tub. I snapped the male & female parts together & the spinner held. Thanks
Eileen from MOLINE, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
After 14 years of use, the upper (3rd level) wash spinner was found in the center of the upper drawer.
It is possible to replace the 3rd level wash spinner by removing two retaining screws holding the plastic water passage inside the dishwasher. One screw is on the back wall and the other on the ceiling. It is advisable to place a towel over the bottom of the tub to prevent dropping the screws inside the bottom grinding chamber. The plasti
... Read morec water passage can be gently bent downward to complete the repair. Insert the plastic bearing into the spinner from the bottom side of water passage and press the plastic retaining pin into the plastic bearing from the top side. You will hear an audible click when the retaining pin is fully pressed into the plastic bearing. Replace the removed screws to complete the repair.
Read less
Robert from East Peoria, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper level water diverter
Viewed video, took shortcut by removing upper screw on water bar, replaced diverter disc and secured with 2 supplied fasteners. Works like new and tickled that there was no wait for service on the machine. Another easy repair thanks to this site !!! WSD
Walter from WEST PALM BCH, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top wash spinner came off
removed one screw holding the water tube up; gently pulled tube down to access male plug; removed worn plug, inserted new plug; snapped spinner and female plug from the bottom; replaced water tube screw.
There is a button that connects the spinner. It wore out, and the spinner fell into the top rack after a use of a cycle one day. Your diagram of the dishwasher was very helpful to understand what part to order. Your delivery was swift, and we only had to hand wash dishes for three days. Thank you for your excellent web page design and
... Read more service. I will use your company again!
Easy as pie. If you can build with Legos you can do this. It takes about 60 seconds! Really. Just follow the instructions given by others (although I did not remove the upper screw, I just carefully pulled the upper arm down about 1"). Insert the keeper button in the top, insert the spinner in the bottom and snap together!
Dean from Austin, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack was not rinsing dishes properly. Spinner fell down inside dishwasher.
I first removed the upper rack. Using a Phillips screwdriver, I removed both the upper and back wall screws, holding the rinse tube.(be careful not to drop screws) The new kit has a spinner, cup type washer and pin. The pin (this the part that actually failed) will fall or push out from the upper side of the rinse tube when the screws are
... Read more removed and you push downward on rinse tube. Simply place the cup type washer through the solid side of the spinner (curled plastic molded side twirls the water over dishes) and install the new pin from the upper side of the rinse tube, while holding spinner and washer. Push pin until it snaps in place. (don't need too much pressure) Re-install the rinse tube using Phillips screws and you're done!
Read less
dwight from florissant, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
#rd level spinner fell off after breaking.
I pulled down on the upper spray arm and took out the broken plastic part and put in the new one then snaped in the retainer part and that is about it. Took less than a minute and did not need to remove dish rack or loosen any screws.
Bryce from Melbourne, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper wash spinner fell off
It honestly took more time to take the dishwasher baskets out than the actual repair. Once the baskets were out, I put a piece of newspaper over the lower drain in case I dropped a part or the screw. I removed the top screw to access the broken part, removed it, and installed the new spinner. I put the screw back in and 2 minutes later,
... Read more the dishwasher was in use once again.
Too easy!
Read less
Thomas from Canyon Country, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Beverly
August 17, 2017
My spinner fell off and I need to replace it. Does the 3rd level wash spinner kit have everything i need, or do I also need the screw 3400850 (part # 11 on the upper wash & rinse parts diagram)?
For model number gu1200xtkq0
Hello Beverly,
Thank you for your question.
The 3rd level wash spinner kit does include everything you need to replace the spinner. The screw is used to hold the spray tower in place.
I hope this helps!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Diana
February 5, 2018
How so you release clips on spray arm in back and at top
Hi Diana,
Thank you for your question. For information on how to release the clips from the spray arm, there is a video listed with the part on our website that you may reference. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Diana
February 5, 2018
Do i have to loosen a screws on spray tower
Hi Diana, Thank you for the question. Here is a link to the video on how to install the Spinner Kit. Hope this helps!
https://www.youtube.com/watch?v=aVG-UEtb2C8
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
December 18, 2018
Thank you for your prompt answer, but it was a little unclear. You said the leak could be affecting the pressure and preventing this part from spinning, but the part is not spinning because it fell off along with the pin that holds it. I do not see any other cause of the leaking and still wonder if i replace the spin kit, will it fix the leak. Thank you.
For model number 66517379301
Hello Tom, thank you for your question. The water may be coming from the to of the unit straight out towards the door, which can cause some leaking water. If you haven't noticed any water before this part fell off, it is probably the cause of the leak. I would recommend replacing this part and if the leak continues we can provide some troubleshooting information at that time. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
December 17, 2018
I found the part inside the dishwasher but not the locking pin. I noticed some water on the floor. Could this part falling off cause the leaking?
For model number 66517379301
Hi Tom, thank you for your question. It could be. It depends on if the leaking is effecting the water flow up to that spinner. If the leaking is effecting the pressure that could be why this part is not spinning. I do imagine that if you figure out what is causing the leaking and if there are no clogs in your tubing and filters, that may fix the issue you are having with this part. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bill
January 5, 2023
Do I have to replace the spinner, if I just need a locking pin? Have spinner and bushing. Thanks
For model number 66517483300
Hello Bill, Thank you for writing. The Pin is only sold as part of the kit so the spinner would need to be ordered. You do not need to replace the spinner but it will come as part of the Kit. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
