Intermittant overfill during fill & rinse cycles

ApplianceGeneral Electric Washer


Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Christopher From Sarasota, FL

Oct 17, 2009

9 out of 11 people found this instruction helpful

1. Unplugged unit
2. Disconnected water hoses
3. Removed 4 top panel screws
4. Folded panel forward to access components
5. Disconnected connectors from solenoids on water valves, marked with tape
6. Removed 2 hex screws to water valve
7. Loosened clamp and removed water hose connection from water valve
8. Installed new water valve, hose assembly, and reset clamp
9. For water level switch, disconnected connectors and water hose
10. Pushed down metal tab on backer plate and rotated old switch until it loosed and was removed
11. Installed new switch in reverse order.
Runs like new

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Level Pressure Switch

Part Number: PS269904

In Stock

Dual Water Inlet Valve

Part Number: PS1155105

In Stock