Ice maker continued to cycle and would never stop to add water

ApplianceAmana Ice Maker

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

len From houston, TX

Oct 16, 2009

0 out of 1 people found this instruction helpful

Remove ice bin. Loosen two mounting screws holding ice maker in place ( not necessary to remove screws), Remove two screws holding cover over ice auger. Behind cover is connection for ice maker. Need two hands to disconnect wiring connector from ice maker( tight area to work in,narrow shoulders and long arms help). Squeeze tab on one end of connector while pulling connectors apart. DO NOT PULL ON WIRES, ONLY PULL APART CONNECTORS.
After ice maker is out use pin points on end of timer to check contact points to be sure all contacts are made. Is possible to insert an Ohm meter probe in holes at end of timer, it is not necessary to remove timer to check unless problem is found with open contact.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Replacement Ice Maker

Part Number: PS2121513

$107.31
In Stock