Wouldn't spin

ApplianceKenmore Washer

Model110.92491210

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Wrench set
Nutdriver
Screw drivers
Socket set

William skip From New Brighton, MN

Oct 07, 2009

0 out of 2 people found this instruction helpful

First I opened up the control console by removing two screws - this allowed access to the connector at the end of the part harness. 2nd I removed the agitator so I could get my head down inside the chamber to see the clips that held the wires in place. Then I removed the part and replaced it with the new one dressing the wire through the two clips, up through the hole to the above mentioned connector. Reassembled all.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly

Part Number: PS334600

$27.27
In Stock