no flame on burner after initial ignite

ApplianceKenmore Dryer

Modelunknown

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Thomas From Muskegon, MI

Oct 02, 2009

1 out of 2 people found this instruction helpful

I shut off the power supply (pulled plug) . Opened the front access door on bottom of dryer, The two coils sat on top of burner unit, with a plate and 2 Phillip head screws securing them. .I used a small set of pliers to pull the terminals off, then I used a short Phillip head screw driver due to the proximity of the dryer drum close by. The coils slide off, slide the new ones on, re secure the plate with screws, reconnect the terminals, plug in the power cord and away you are for a fraction of the cost.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Secondary Coil Valve - 3 Terminals (Now subbed to 'M' Series New Style Coil Kit)

Part Number: PS334310

$13.95
In Stock

Two Terminal Gas Valve Coil (Now subbed to 'M' Series New Style Coil Kit)

Part Number: PS334310

$13.95
In Stock