display lights flashed briefly and beeped

ApplianceKitchenAid Refrigerator

Modelkss042fmx01

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Jarrett Garcia From Palm Desert, CA

Sep 26, 2009

39 out of 50 people found this instruction helpful

Remove many screws to access top electronics boxes. Remove 2 screws to open main control board box. Disconnect the 6 coded plugs. Release tabs holding board on box and transfer to new board. Install jumper on center of board in same location (not supplied with new one). Fit new board to box. Connect all plugs. Re-mount box and all covers and screws. Plug in and turn on power switch. Note:This repair was done after a long diagnostic process and downloading of the factory technical manual. Not recommended for the novice DIYer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Control Board (Now subbed to Electronic Control Board)

Part Number: PS2360723

Recycling Rebate Available No Longer Available