Rusty movable shelf racks

ApplianceMaytag Dishwasher

Model

Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools

Peter From Andover, MA

Sep 26, 2007

6 out of 6 people found this instruction helpful

Since there are no nuts or anything else to remove on these racks, bending them into place is the only obvious way to go to fit them onto the existing racks. Taking out the old movable racks is the easy part - just take a pair of pliers and bend back the 'O' part of the movable rack where it goes over the pin on the big rack. To put on the replacement racks, I found that I had to bow the racks in the middle to make them fit. Simply pressuring them into place didn't have enough give. With a helper to hold the big rack steady, I could use 2 hand to bow and align the movable racks and snap them into place. You have to be careful not to bow to much or you could permanently bend the new parts. I broke one weld between the short pieces that go perpendicular to the long wires on the new rack by putting too much pressure on the long wires.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Shelf for Lower Dishrack (Now subbed to Lower Rack Shelf)

Part Number: PS2097245

No Longer Available

USE WPL 99001429 (Now subbed to Upper Rack Shelf)

Part Number: PS2099032

$28.77
In Stock