Dryer would not keep running when start button pushed.

ApplianceWhirlpool Dryer

Model11060972990

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Thomas From Madawaska, ME

Sep 16, 2009

3 out of 5 people found this instruction helpful

Removed each side of the upper console. (Plastic piece, pull forward then up to remove.) Removed two phillips screws on bottom of console on each side. Slightly lift then tip console up. Control board held by four plastic clips/ standoffs. (Used pliers to compress.) Unplug connectors from old control board, noting location. While holding new control board in the static protective plastic the part was shipped in, reconnected connectors, and pushed board in place. Worked great, first try.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dryer Electronic Control Board

Part Number: PS2344543

$193.39
Recycling Rebate Available
In Stock