Ice maker wouldn't dispense through the door

ApplianceMaytag Refrigerator

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers

Judith From Alexandria, TN

Sep 08, 2009

1 out of 2 people found this instruction helpful

Remove bolt on lower left side that locates the Ice Enclosure. Partially remove Ice Enclosure. Locate electrical connector behind Ice Enclosure. Squeeze locking tabs and wiggle connector free. Completely remove Ice Enclosure and place on work surface. Remove phillips head screws that attach motor to Ice Enclosure. Remove phillips head screws that attach solenoid to Ice Enclosure. Grasp motor shaft with pliers to hold it still. Wedge screw driver handle into motor yoke to gain additional leverage as you turn yoke clockwise (reverse thread) to remove yoke from motor shaft. Keep track of spacer bushing that will fall from motor shaft when yoke is removed. Attach motor and solenoid to new Ice Enclosure. Replace bushing and yoke onto motor shaft. Reassemble Ice Enclosure into freezer compartment. Don't forget to plug harness back in and to replace locating bolt on left side of Ice Enclosure.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Enclosure

Part Number: PS2060964

$73.73
In Stock