impeller keeps coming of shaft

ApplianceFrigidaire Washer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers

Eric W From Pollock Pines, CA

Sep 24, 2007

0 out of 1 people found this instruction helpful

I unplugged washer from wall, removed lower front panel, two screws, then unplugged the pump motor, then removed the two hoses going to and from the pump, spring clamps on hoses, used pliers, removed the two screws with a nut driver that hold the pump/motor assembly to the frame. I then reversed the whole procedure and all is fine now.
I also noticed that the new pump impeller has four blades and the old one had only three, both old and new are made in italy, I assume this makes the pump more efficient.
End of story!!!!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drain Pump and Motor Assembly (Now subbed to Drain Pump - 60Hz 120V)

Part Number: PS2342445

$84.22
In Stock