WATER LEAKING INTO DRUM WHEN MACHINE IS OFF

ApplianceMaytag Washer

ModelNEPTUNE

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers
Socket set
Wrench(Adjustable)

SHANE From NUEVO, CA

Sep 03, 2009

7 out of 9 people found this instruction helpful

REMOVED THE FRONT DOOR SCREWS & FRONT PANEL SCREWS, REMOVED SCREWS IN THE "L" BRACKETS HOLDING THE TOP DOWN, TILTED THE TOP UP & BACK, REMOVED 3 HOSES & 3 WIRE CONNECTORS FROM THE OLD WATER VALVE. REMOVED 1 SCREW HOLDING VALVE & REPLACED WITH NEW VALVE. RE-CONNECTED 3 WIRES & 3 HOSES, REPLACED TOP & FRONT DOOR. WHILE THE MACHINE WAS OUT FROM THE WALL, REMOVED THE BACK LOOVERED COVER, REMOVED THE OLD BELT & REMOVED 1 BOLT HOLDING MOTOR. REMOVED TH E MOTOR, REMOVED & REPLACED THE 2 PLASTIC INSOLATORS WITH THE NEW ONES SUPPLYED WITH THE BELT ON THE MOTOR SPINDELS, RE-INSTALLED THE MOTOR & BOLT, THEN THE NEW BELT THAT IS SELF ADJUSTING. REPLACED BACK COVER & PUT MACHINE BACK ONLINE, EASY DEAL FOR ANYONE WITH VERY BASIC MECHANICAL KNOWLEDGE

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drive Belt and Motor Isolator Kit

Part Number: PS2003327

$20.64
In Stock

Water Valve - 4 Coil

Part Number: PS2020604

$101.36
In Stock