Lid to wash tub was completely broken off (bought it that way - got it cheap because of this).

ApplianceMagic Chef Washer

ModelW20HN2

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Wrench set
Screw drivers
Socket set

Dennis From Oshkosh, WI

Aug 30, 2009

0 out of 1 people found this instruction helpful

Remove two screws holding a special clip on the back of the washing machine (near top- one on each side). Top of washing machine pops off now by prying front edge up (2 snap type clips hold front edge of top down). Once top is loose just pivot it up on edge so you can get to the bottom side of it (don't have to remove the wires etc. as they are long enough for this). Remove one screw in each hinge half located on bottom side of washing machine top and remove old hinge half from top. Remove broken hinge halves from door to washing machine by removing one screw from each one. Put new hinge halves together and fasten to door. Then set entire hinge/door assembly on washing machine top and screw to top as an assembly. Snap top of washing machine back down on front of machine and put clips/screws back in on back of machine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Hinge

Part Number: PS2037922

$4.05
In Stock

Lid Hinge Pin

Part Number: PS2037923

$7.46
In Stock