Buttons on the control panel started dying. Only 1,4, and 7 still worked., and about half of the other controls.

ApplianceMaytag Range

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Tim From Saint Paul, MN

Aug 19, 2009

2 out of 3 people found this instruction helpful

Remove the screws from the trim pieces. Remove the plate under the control panel by unscrewing the six or so screws holding it in place.

Pull the oven out a little and prop it up on blocks.

Remove the nuts fastening the control panel with a 1/4" nut driver. Remove the nuts securing the circuit board to the panel. Remove the connector ribbons from the circuit board.

Reverse the process to install the new panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Panel With Touch Pad - White

Part Number: PS2357917

$180.08
In Stock