Oven door was distroyed and dirty from previous owner

ApplianceWhirlpool Range


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Alejandro From West Palm Beach, FL

Aug 19, 2009

12 out of 32 people found this instruction helpful

I dismounted the oven door following the graphic templates that this site has for that model. Then I replaced the gasquet (seal window), appliying an apoxic glue to hold it on place. Then I started to put it togueter, from the bottom to the top, first the lower trim, I screwed it back to the metal frame, then the left and right trims, it goes tied by pressing it to the sides, after that I installed the top and screwed it to the frame. It holded all toguether cery well. My oven looks like new now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 179051 (Now subbed to Screw)

Part Number: PS320716

In Stock


Part Number: PS340226

In Stock


Part Number: PS396630

In Stock

Bottom Door Trim

Part Number: PS650797

In Stock

Sheet Metal Screw (Now subbed to SCREW)

Part Number: PS3651485

In Stock

Oven Door Side Trim - Right Side (Now subbed to Door Trim - Right Side - Black)

Part Number: PS10066094

In Stock

Oven Door Side Trim - Left Side (Now subbed to Door Trim - Left Side - Black)

Part Number: PS10066095

In Stock