several of the locations of the mounting screws for the panel had broken, and the latch mechanism became unreliable

ApplianceKitchenAid Dishwasher

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Jeffrey From Nashville, TN

Aug 06, 2009

2 out of 3 people found this instruction helpful

after removing the fascia below the control panel (optional wood inlay in this case), remove the 4 phillips screws holding the control panel. it can be eased away from the door assembly, and fully separated after the two electrical connectors are detached from the circui board in the door (disconnect power to the unit before attempting this). The plastic control screen must be gently pried off from the old panel and repositioned on the new one. You may need to add some adhesive. The latch mechanism also needs to be transferred, and this requires careful prying. Replace the electrical connections, and replace the control panel. Be certain the large flanges at the bottom of the panel are behind the metal panel on the door. There are some small flanges that stay on the outside. On this installation the small extensions on the flanges were snipped off to accommodate the custom wood panel

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Panel

Part Number: PS402373

$56.71
In Stock