Visitor Rating Heating Element would not heat up for Baking Overall Rating: Very Helpful Rated By: 6 Customers Posted By: Karen From High Springs, FL Posted: 9/18/2007 11:30:44 PM Appliance Repaired: Magic Chef Range/Stove/Oven/Hood Age Of Appliance: More than 10 years Removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires and then replaced the new heating element by connecting the wires and then placing the screws back in. Was a lil difficult because this unit has no oven light and it required a flash light. Parts Used: Bake Element (terminal distance of 16") (Now subbed to Bake Element (terminal distance of 16")) Level of difficulty: Easy Time to do repair: Less than 15 mins Screw drivers How helpful was this repair story?

Parts Used in this Repair Bake Element (terminal distance of 16") (Now subbed to Bake Element (terminal distance of 16")) The part 'Bake Element (terminal distance of 16")' that Karen From High Springs, FL used in this story is now subbed to part Bake Element (terminal distance of 16") This oven bake element with push on terminals has a terminal depth of three inches, making a total element length of nineteen inches. PartSelect #: PS2081226 Compare At: $40.12 Your Price: $33.43 You Save: $6.69 Availability: In Stock

Repair stories are provided by PartSelect customers and are not intended to replace an on-site diagnosis or advice from a qualified appliance service technician. Difficulty of repair and time to repair may vary based on experience.

See the index of all our appliance repair stories.

• Repair help
• Special offers
• Maintenance tips