Level of DifficultyEasy
Time to do repair15 - 30 mins
Age of Appliance5 - 10 years
Neale From Murrieta, CA
Jul 28, 2009
4 out of 4 people found this instruction helpful
Removed the door assembly with 4 Torx screws, replaced the broken door with the new one. The assembly is spring closed, so had to be pivoted into place. Then the door didn't open when the ice button was pushed, but made a loud snapping noise. After removal again, it was determined that the solenoid was not attached properly to the arm. After this was done and the whole assembly was put back on the door, everything worked fine.
Watch out for the circuit board at the front of the assembly, it carries a pretty good bite!
|Part Photo||Part Description||Price||Availability
Part Number: PS2061138