Control buttons got tired

ApplianceGeneral Electric Range


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Chris From No. Hollywood, CA

Sep 15, 2007

3 out of 3 people found this instruction helpful

Most everything pretty straight forward EXCEPT the terminal connectors were in a different order and placed in different locations. One wire from the original wire harness would not reach with the new arrangement had to lengthen wire to install. Make sure you write down the connector name on the circuit board and what color wire goes to it, rather than just the color code order because they may be different. The new module mounting plate was substantially thicker than the original requiring different screws to reinstall. Also, the plastic face plate is not part of the replacement. If yours is worn, you might want to buy a new one as well. Before re-assembly, make sure all the clear internal surfaces that show are nice and clean (like the front of the display and the back of the faceplate.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability


Part Number: PS238431

No Longer Available