Washing machine wouldn't agitate or spin.

ApplianceWhirlpool Washer

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

carol From rocky ford, CO

Jun 21, 2009

25 out of 615 people found this instruction helpful

First I turned washer on its side. I removed clamps on hoses that connect to water pump.Then I removed hoses and clips that hold water pump. I moved water pump to side and removed clip retaining screws. Took screwdriver and pryed clips from motor. Removed motor. Pryed old coupler off motor then pryed old coupler off transmission. Took a drift and hammer and drove coupler half on motor then drove other half on transmission. Put rubber coupler middle on transmission coupler. Installed motor on transmission, put clips back on motor and retaining screws. Installed water pump and retaining clips. Put hoses back on water pump.
You cant see clip retaining screws you have to feel around for them.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Direct Drive Motor Coupling

Part Number: PS1485646

$11.77
In Stock