Blower motor died and I needed to replace it

ApplianceJenn-Air Range

ModelS160

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver
Screw drivers

John From Berkley, MI

Jun 17, 2009

363 out of 366 people found this instruction helpful

Most of the repair was obvious as I took the blower apart before ordering the parts. Unfortunately the new motor was significantly larger than the original motor so I had to um. Adjust the position of some of the other parts to fit it in. There was a sheet metal flange that was installed on the other side of the blower from the motor which was designed to focus the air flow into the blower. I used a hammer to ajust the angle of flange so it no longer extended as far into the blower housing.

It works just fine although its a bit louder than the old motor was.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Blower Motor Kit

Part Number: PS1569907

$178.05
In Stock

Urethan Foam Gasket

Part Number: PS1643288

$12.12
In Stock

Grease Filter

Part Number: PS2077593

$16.83
In Stock

Motor Isolator

Part Number: PS2078586

$3.96
In Stock

Hose Clamp

Part Number: PS2201383

No Longer Available