The washer would only go on the delicate cycle no matter what cycle it was set on.

ApplianceMaytag Washer

ModelMAT12CSAAL

Level of DifficultyEasy

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Nutdriver

Don From Crescent City, CA

Jun 05, 2009

5 out of 5 people found this instruction helpful

This is a coin-op washer so the timer had to be removed through the coin box. The top lid was first removed from the coin box. There is one 5/16 hex head screw holding the timer in. After removing the screw the timer was lifted from the box. It is a tight fit that requires some wiggling around of the timer. There are two plug in wire harnesses attached to the timer. Because of the position of the timer the wires are a little short, but are able to be unplugged. The new timer was installed and the procedure reversed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer

Part Number: PS2019367

$139.20
In Stock