Plastic Water Spout Broke Off

ApplianceKitchenAid Refrigerator

ModelKSRS25QAWH00

Level of DifficultyDifficult

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver
Screw drivers
Socket set

Michael From Colorado Springs, CO

Jun 04, 2009

11 out of 12 people found this instruction helpful

Turn off water supply line fridge. Removing front panel is a must to allow acces to spout and water line. Be careful not to crack front panel $90, it snaps in from the botton, slide a stiff putty knife along bottom edge and gently pry outward to remove. Remove 2 screws that hold spout in place, then cut water line right behind spout. The tricky part is fishing water line down through door. You need to splice new line to old with double sided screw or something with threads that will prevent the lines from pulling apart, then pull water line from bottom of door by hinge, very tight when pulling through hinge opening. You will need to remove vented dust cover at botton of doors to acces the water line. The line has a threaded coupling so unscrew and drain water then cut new line to length. There is a small metal insert in old line that needs to be removed and inserted into new line before attaching coupler. I could perform this in half the time now that I have done it once.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Nozzle and Tube Kit

Part Number: PS371704

$41.82
In Stock