Plastic bezel broken

ApplianceMaytag Dishwasher


Level of DifficultyReally easy

Time to do repair1- 2 hours

Age of Appliance5 - 10 years


Michael From Silverdale, WA

Jun 04, 2009

11 out of 15 people found this instruction helpful

1 - Unlugged power cord.

2 - Reviewed main plastic panel to see where required screws were located.

3 - Removed 8 screws on inside stainless panel.

4 - Separated the loose panel while removing screws holding the front plastic bezel in place. Removed two screws hold latch in place.

5 - Noticed that two screws were holding the PC board down plus a retaining nub on the plastic piece. Removed screws and held PC board out of way.

6 - Pulled off plastic splash shield held down with sticky gunk.

7 - Was a little difficult keeping the front door panel separated from the inside panel while doing all the work.

8 - Installed new handle into latch device and then attached to inside of door.

9 - Put it all back together twice after forgetting to install the two PC board screws. Oops.

10 - Felt confident the repair was correct when done.

Parts arrived as promised. Web exploding details insured exact replacement part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Latch Handle

Part Number: PS2100167

In Stock


Part Number: PS2202565

In Stock

Control Panel - Black

Part Number: PS2340884

In Stock