machine stopped at rinse cycle. shut off.

ApplianceMaytag Washer

Modelmah5500aww

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Royce From Woodstock, GA

May 29, 2009

11 out of 13 people found this instruction helpful

removed 5 screws from back of control panel holding back panel cover. removed control knob from front of control panel. removed screw holding Timer. slid Timer module to right and pulled Timer out. disconnected plug from old module. plugged
new module in and reversed previous removal procedure. Unfortunately this did not correct the problem as machine still stops at rinse cycle and shuts down. misdiagnosis on my part. called repairman and he diagnosed a bad control board.
Cost is 3 times cost of Timer alone.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer

Part Number: PS2020661

$124.20
In Stock