post that holds the door broke

ApplianceMaytag Refrigerator


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Nutdriver


May 24, 2009

0 out of 1 people found this instruction helpful

had to remove all drawers, once removed used nut driver to remove three screws. then removed the rail that holds the drawer. used nut driver again to remove rail from the original to mount the rail to the new bracket. Slide in holding brackets in front and back had to be removed, Then we had to do some wiping down and cleaning from spills that we had not seen. Installed the re-assembled bracket. installed the braces in front and back, installed the glass plate then re-installed the drawers. - took longer than I expected but worked fine.- weak point on the bracket is the pin that allows the door to pivot up/down.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 12656019 (Now subbed to Pantry End Cap - Right Side)

Part Number: PS2365144

In Stock