THE ICE CUBES WOULD DUMP BEFORE FROZEN

ApplianceMaytag Refrigerator

ModelMSD2454FRW

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Harold From Belton, MO

May 18, 2009

5 out of 5 people found this instruction helpful

FIRST PULL THE ICE BIN FROM THE FREEZER.
THEN REMOVE ONE SCREW THAT HOLDS THE ICE MAKER IN PLACE. ROTATE THE ICE MAKER TO THE RIGHT AND UP TO RELEASE FROM POSTS ON WALL OF FREEZER. USE A FLAT BLADE SCREWDRIVER AT THE FRONT BOTTOM OF THE WHITE COVER TO PRY THE WHITE COVER FROM THE ICE MAKER BODY. USE TEH FLAT BLAD SCREW DRIVER TO RELEASE THE CLIP HOLDING THE WIRES TO THE ICE MAKER. REMOVE A METAL CLIP FROM THE WATER RECEIVER AND TRANSFER TO THE NEW ICEMAKER. TRANSFER THE ICE SENSING BAIL TO THE NEW ICE MAKER. INSTALL WIRES, FRONT COVER, HANG ON POSTS AND REINSTALL SCREW TO SECURE TO FREEZER WALL.
ACTUATOR PAD REQUIRES YOU TO FIRST REMOVE PLASTIC COVER OVER THE TOP HINGE OF THE FREEZER DOOR. YOU MUST UNPLUG THE WIRE CONNECTOR TO PREVENT SHORTING OUT THE PRINTED WIRING BOARDS LOCATED BEHIND THE DISPENSER ASSEMBLY. THEN REMOVE TWO SCREWS AND FROM THE BOTTOM CAREFULLY SEPARATE THE DISPENSER FROM THE DOOR. THE WIRES ARE NOT VERY LONG SO DON'T JUST YANK IT OUT. THE PAD IS EASILY REMOVED AND THE NEW PAD WORKED INTO PLACE. REINSTALL THE DISPENSER INTO THE DOOR, RECONNECT THE WIRES AND REINSTALL THE COVER AND YOU ARE FINISHED.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Actuator Pad

Part Number: PS2059931

$15.80
In Stock

Replacement Ice Maker

Part Number: PS2121513

$107.31
In Stock

Maytag PuriClean Refrigerator Filter (Now subbed to Water Filter)

Part Number: PS2326378

$49.48
In Stock