Washer stopped during operation - lid switch failing

ApplianceWhirlpool Washer

ModelLSN2000

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers

Jonathan From Sandy, UT

May 14, 2009

0 out of 1 people found this instruction helpful

Disconnect washer from hoses and wiring. Slide out from wall. Remove two screws holding control panel and lift panel up. Remove washer back on R side to access switch wiring. Remove two screws securing switch to washer top. Remove clip holding switch-wire-conduit hidden under washer top. Install new switch.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly with Leads

Part Number: PS350434

$30.40
In Stock