Fan switch was broken internally.

ApplianceJenn-Air Range

Model

Level of DifficultyA Bit Difficult

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Socket set

Charles From Santa Clarita, CA

May 08, 2009

0 out of 1 people found this instruction helpful

After reading the other do-it yourselfers I knew it wasn't going to be an easy task. However, when I received my new switch I saw that the hook up and installation would be a snap. My only problem was removal of the old lock washers so I cut them off with my tin snips and once the new switch was attached to the plate I used a socket on the end of a three inch extension. I placed the socket over the new washer and gently tapped on the end of the extention until the washer was seated. It took about two or three taps on each washer and I was finished. Everything went pretty well. Total time to install was about ten minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Fan Switch Kit

Part Number: PS2002868

No Longer Available