Loud squeal when spin cycle finished, white powder under washer

ApplianceMaytag Washer

ModelMAV6200AWW

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance1 - 4 years

Tools Wrench set
Pliers
Nutdriver

Kevin From Pooler, GA

May 06, 2009

5 out of 5 people found this instruction helpful

Read DIY review from William, Middleton, OH on 01-15-08. Tip on how to relieve spring pressure on brake assembly worked like a dream (3ea 10-24X2 bolts/machine screws). Replaced brake and machine works like new and was an inexpensive fix. Once the shell/housing is off the machine, tub can be turned upside down and the base doesn't need to be removed. White powder under machine was a plastic wear ring that tells you when your brake rotor needs to be changed. Brake rotor still had lining but was much thinner than replacement part. Note* Use putty knife to push in clips on front to release the top lid section.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 35-6714 (Now subbed to Washer Brake Rotor)

Part Number: PS2347192

$44.61
In Stock