Ice dispense would stick in ON position

ApplianceMaytag Refrigerator

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools

Michael From Kutztown, PA

May 05, 2009

2 out of 3 people found this instruction helpful

Remove the slide-in tray. Remove just the 2 bottom screws of the panel, and slide the panel up to release the top. While suporting the panel, unplug the cable that goes to the PC board in the panel. Remove 3 screws that hold the assembly with ice and water dispenser actuator pad and switch and pull down and out. ( make note how the water tupe is routed for re-assembly) While supporting the assembly disconnect the 2 cables to the assembly. Replace the switch and actuator pad and reassemble. ( make sure the water tube is in the correct position).

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Limit Switch

Part Number: PS1565329

$21.76
In Stock

Ice and Water Dispenser Actuator Pad - light gray

Part Number: PS2059376

$23.86
In Stock