The Dishwasher Sump Housing was leaking.

ApplianceGeneral Electric Dishwasher

Model

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers
Socket set

Mitchell From Fairbanks, AK

May 04, 2009

1 out of 1 people found this instruction helpful

First I undid the hose clamps holding the housing on the dishwasher. Then I removed the 4 screws that connected the motor to the bottom of the dishwasher. I then slipped the house UP out of the dishwasher from the inside where your dishes are washed. This also required me to remove the guard that prevents any large objects from washing away down into the Sump Housing. This required 2 long screws to be removed. Then you just drop the housing back down into the hole where the previous one was removed. Removing the 4 screws from the motor allows the flexibility to move the motor around and back onto the new housing. Button everything back up at this point and tighten the hose clamps back up and your set.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Sump Housing

Part Number: PS259557

$19.25
In Stock