Leak from the bottom center

ApplianceGeneral Electric Dishwasher

Modelpdw7800

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers
Socket set
Wrench(Adjustable)

Ashraf From Merrick, NY

Apr 28, 2009

14 out of 17 people found this instruction helpful

The connector pump had a pinhole leak at the seam (new part did not have seams). Also replaced the sump inlet which looked worn and the impeller.

Lay dishwasher on it's back to access the bottom. Loosen all clamps. Remove both U shaped holders on the sump inlet. Remove screws holding the drain motor. Pull out the pump motor and sump inlet. Connector pump can be unscrewed from the bottom.

Replace parts and reassemble. It isn't that bad once you start disassembly, especially for anyone somewhat handy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lower Spray Arm Bearing

Part Number: PS258123

$2.23
In Stock

Inlet Sump

Part Number: PS259528

$18.16
In Stock

Pump Connector

Part Number: PS259530

$19.21
In Stock