If you placed an order on ApplianceHelp.com the order is still valid and you can check on its
status and make changes here on PartSelect.com. Click here for more details.
Level of DifficultyA Bit Difficult
Time to do repair1- 2 hours
Age of Appliance5 - 10 years
Wrench setNutdriverScrew driversSocket set
12 out of 17 people found this instruction helpful
I removed the dryer rear upper cover to expose the start and cycle selection knob. My wiring diagram was in there. I removed the wiring on the rear of the cycle selection knob (timer assembly) locations were marked on the device. I ohmed the switch contacts for the heat circuit and had an open circuit through out the full rotation of the knob. I removed the 2 screws on the back of the timer assembly and the burnt contacts fell out. I removed the knob and 2 mounting screws and the device was out to retrieve my part numbers.
Were these instructions helpful?
Part Number: PS351753