Factory installed hinges were bent, preventing the oven door to close tightly

ApplianceMagic Chef Range

Model

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance1 - 4 years

Tools Screw drivers
Wrench(Adjustable)

Tom From Issaquah, WA

Apr 03, 2009

6 out of 11 people found this instruction helpful

Had to turn off the propane, disconnect the propane line and then remove several screws holding the stove in the cabinet. Once I was able to pull the unit out of the cabinet, I had to remove several other screws for the sides in order to gain access to the hinge arm and spring. The front of the oven door had to be removed in order to get to the hinges. Replaced both left and right hinges, hinge arms and springs. After replacing all of the screws, I reinstalled the stove into the cabinet and reinstalled the screws securing it to the cabintet. Reconnected the gas line and checked for leaks. None found. Oven door operates properly now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 12400028 (Now subbed to HINGE KIT)

Part Number: PS2006877

No Longer Available

USE WPL 12400029 (Now subbed to HINGE KIT)

Part Number: PS2006878

$3.82
In Stock

USE WPL 3423F001-34 (Now subbed to SPRNG-DOOR)

Part Number: PS2037683

$3.82
In Stock

USE WPL 74001835 (Now subbed to SPRING- OV)

Part Number: PS2080580

No Longer Available