would not start

ApplianceGeneral Electric Dishwasher

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Screw drivers

MICHAEL From ORLEANS, IN

Mar 24, 2009

14 out of 17 people found this instruction helpful

First I removed the 6 screws that hold the inside cover on the door.Then I remover the plastic cover over the switches,pulled out the switches and disconnected the 2 wires from each switch and connected connected them to the new switches exactly as they were on the old switches.Then reinstalled the switches in their holders.I then removed the plunger and spring from between the switches and installed the new spring and plunger exactly like the old one was installed.I reinstalled the door cover making sure everything was in it's place,I put the screws in the door cover and I was done.It was a very simple job. Mike

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Spring Plunger

Part Number: PS1019010

$4.41
In Stock

Switch Interlock

Part Number: PS1021382

$7.27
In Stock

Interlock Plunger

Part Number: PS1993857

$2.48
In Stock