Washer would not agitate

UNPLUG THE WASHER FROM THE OUTLET

Remove control knob, - use thin blade to pry off the front cover to reveal a small locking clip. Slide clip out with blade or screwdriver.

Note the two bolts to remove the timer using a nutdriver or small socket

Remove front control cover, (There are actually four screws on top but you only need to remove the two inside screws. The outside screws just hold the plastic ends on.)

While supporting the cover, remove the timer by removing the two bolts under the knob you removed earlier.

Remove the two electrical connections. ( Hold locking clip out when wiggling the connection free.)

Reverse order install of the new timer, plug it back in and washer washes, magic!