Water was not being removed from the wash tub after the spin cycle

ApplianceMaytag Washer

Modela612

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

John From Fort Lauderdale, FL

Mar 17, 2009

24 out of 26 people found this instruction helpful

I loosened three screws to relieve the belt tension and removed the belt from the pump drive pulley. After removing the water from the wash tub I removed the intake and output hoses from the pump. I next removed the mounting screws and removed the pump. I attached the new pump loosely and re-attached the belt. I moved the pump to tighten the belt tension and tightened the mounting screws. I re-attached the hoses, filled with water, checked for leaks and replaced the front panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Pump Assembly (Now subbed to Drain Pump)

Part Number: PS2347234

$54.85
In Stock