Detergent Cup did not work

I would recommend getting the entire unit. I could have replaced the electrical component only, but the other parts were deteriorating.

I removed the 4 screws in the lower side of the door and removed the front.

I lossened the 6 screws holding the detergent cup. This was done with a small hex wrench.

I replaced the dispenser and connected the wires back onto the electrical sensor.

I put the front back on the door and tested the repair. Worked fine

I will be replacing the door gasket next. I found evidence of leakage when I removed the front of the door to replace the detergent cup.