Failing to complete any of the cycles properly, repeated "click" heard from control unit.

ApplianceMaytag Dishwasher

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

brian From myersville, MD

Mar 10, 2009

9 out of 13 people found this instruction helpful

It was initially unclear precisely which part I needed. I called PartSelect customer service and the agent was extremely helpful and able to quickly advise me on the correct part.

Installation was straight forwared. I used a torx screw-driver to remove the screws holding the inside-door planel. There are wires attached so this needs to be done with care.

I then removed a thin plastic film cover the control assembly. The control assembly is held firm by a screw and is also "snapped" in place. There are obvious tabs which can be spread to allow the assembly to be lifted out.

Each of the wire harness can then be removed from the control assembly.

With the new control assembly in place, the wires can be reconnected very easily. The assembly board itself is well marked enough to determine where each of the wires connects but really, the connectors for each harness is unique so pretty difficult to not get right.

Replace the plastic film and door cover and you are back in business.

I had previously gotten a quote from Sears to do this work and it was over $200 works of labor. Go through PartSelect I not only saved about $40 dollars on the part itself, I also saved $200 on a fairly easy repair that I could do myself in under 30 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

LED Control Board

Part Number: PS2100156

$262.60
Recycling Rebate Available
In Stock