Level of DifficultyReally easy
Time to do repair30 - 60 mins
Age of Appliance5 - 10 years
Screw driversSocket set
1 out of 1 people found this instruction helpful
First I raised the top and took out the two screws that held the front on. Then I removed the back panel which were held by 4 screws. Then I turned the machine on it side and removed the belt. I then pulled the hose off from the tub to the water pump and the small hose on the back of the tub. I then removed the 6 springs that held the tube to the base and then I picked the tub up and turned it over on the floor. Then I backed off on the screws that held the snubber in place. I pulled the old snubber out, retighten the screws that held the snubber tight. Then I reversed my steps.
Were these instructions helpful?
Part Number: PS1792928
Part Number: PS2017965