The main control assembly board was burnt. When I pressed on any of the buttons, the timer would turn on for a few seconds and then fade away.

ApplianceJenn-Air Dishwasher


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Mark From Liberty, MO

Sep 05, 2007

14 out of 14 people found this instruction helpful

I had to remove the 8 screws around the interior portion of the door using a star driver. Once those screws were removed, the front door separated quite easily. I lifted the inside portion of the door to the "closed" position and used a small screw driver to hold it in place. I then removed the 3 screws using a nutdriver to remove the control assembly. I did remove the assembly without detaching any of the electrical connections. Then, place the new assembly in place (but not screwing it in yet), I moved the electrical connections one at a time. After that, I secured the control assembly, and reassembled the door panel. Everything went very smoothly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 99002827 (Now subbed to Electronic Control Board - LED)

Part Number: PS2100158

Recycling Rebate Available
In Stock