Water control would only fill to Medium load then stopped altogether

ApplianceWhirlpool Washer

ModelLXR9245EQ1

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Wayne From University City, MO

Feb 27, 2009

17 out of 21 people found this instruction helpful

I removed the screws holding the control board in place. Removed the knob on the front of the panel and then disconected the wires to the control. Then I took the old control off the board and inserted the new control. I attached the wire connectors to the new control and put the control panel back in place and fastened it with the screws. Last task was to replace the knob. The new control worked wonderfully with the first load of laundry. Piece of cake. Done in 5 minutes or less.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Level Pressure Switch - 5 Level (Now subbed to Water Level Pressure Switch)

Part Number: PS3408073

$49.27
In Stock