leaking under machine while filling

ApplianceWhirlpool Washer

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

elton From detroit, AL

Feb 26, 2009

0 out of 1 people found this instruction helpful

First disconnect power supply, close both water supply valves, move machine away from wall and tilt machine back so that front of machine was about 12 to 14 inches off the floor. Place bucket under pump and hoses, wrap plastic around electric motor to prevent water from getting in motor. Disconnect hoses allowing water to drain in bucket, remove two retainer clips on pump, and pry pump off motor shaft. Use sandpaper or wire brush to clean rust off shaft, apply a small amount of oil or other lubricant to motor shaft, install pump aligning pump drive to motor drive, install retaining clips and reconnect hoses. let it down, plug it in, and turn on water, then wash.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Direct Drive Water Pump

Part Number: PS342434

$29.85
In Stock