took uch longer to warm food until finally bottom bake element would not glow red.

ApplianceWhirlpool Range

ModelRJM2840PO

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Dennis From Amarillo, TX

Feb 24, 2009

2 out of 2 people found this instruction helpful

Dear Part Select:

Thanks! You got me out of the dog house today!

I received the oven part, installed it- it works great! Thanks for your prompt service! If ever I need another part in the future(and I am sure I will) I have you at the top of my list!

First I removed the power to the oven by turning off the circuit breaker to the oven. After that, I removed the two screws (one on each side), that held the old bake element (the element on bottom) in place. I then pulled the element out about 3 inches and disconnected the single wire that connects to each end of the element, (2 wires total), then installed the new element in reverse order.
It was a snap!

Sincerely,

Dennis T.
Amarillo, Texas

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Bake Element - 240V 2500W

Part Number: PS340507

$24.85
In Stock