Horrible Rattle - sounds like drying a load of cleats

ApplianceMaytag Dryer

ModelDE4910

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver
Screw drivers

Anthony From Citrus Heights, CA

Feb 24, 2009

1 out of 1 people found this instruction helpful

I followed the instructions given by other DIYs. The rubber band for the belt was a great suggestion, however having no rubber band nearby, I used a zip-tie that worked out perfectly.

The only tool that I wished I had is a pair of split ring pliers. Not having a pair, used a pair of needle nose and a very small screw driver to provide the leverage to remove the washer.

After following the instructions that came with the belt on how to properly align it to the motor wheel and tension wheel, I plugged everything back in and started it up. Sounded like it was brand new.

I decided not to replace the rollers or drum guides as they looked to be in good shape.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Blower Wheel - with a hub clip (Now subbed to Blower Wheel with Clip)

Part Number: PS2200270

$15.10
In Stock

Tumbler and Motor Belt

Part Number: PS2200550

$14.70
In Stock