Water inlet valve had frozen and burst

ApplianceRoper Dishwasher

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver
Wrench(Adjustable)

Alastair From Atlanta, GA

Feb 24, 2009

3 out of 3 people found this instruction helpful

After turning off the water to the dishwasher, I used the adjustable wrench to remove the incoming water line. Then removed the electrical feed to the water valve. Lastly I removed the rubber hose on the outlet of the valve (after compressing the retaining clip) before removing the one screw that held the valve to the lower frame of the dishwasher. Once the new part arrived, it was simply a matter of reversing the above procedure to install the new part. Took under 15 mins.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Inlet Valve - 120V

Part Number: PS343694

$50.36
In Stock