burners and drip pans rusted through

ApplianceMaytag Range

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Gordon From Deville, LA

Feb 24, 2009

6 out of 11 people found this instruction helpful

I first had to cut off electrical power to the stove top and then remove a little built up grease around the seams where the parts fit together. I then removed the burner head by twisting about 30 degrees and lifting. I then disconnected the spark ignighter wire, ( a slide on spade). This exposed the two screws that hold the drip pan in place. I had to use a drill to remove the screws on the two front burners because they were so rusty, just a minor problem. I then removed the drip pan. Cleaned a few years of buildup cooking splashes next, then installed new seal tape for gaskets and reversed the process. $250 in parts and 30 minutes work saved buying a $1300 cook top,

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Seal Tape (Now subbed to Seal Tape)

Part Number: PS1573896

$18.86
In Stock

USE WPL 3424F002-90 (Now subbed to Drip Bowl)

Part Number: PS2037688

No Longer Available

Burner Head - Black (Now subbed to Burner Head Cap with Spark Electrode)

Part Number: PS2356990

$28.71
In Stock